Our 300 standard colours give you access to a wide range of hues. It is also possible to replicate the colour of your choice through special order.

To request a specific physical colour sample or to meet the terms of a national project specification, you need only contact our representative at 1-866-236-5550 or send your request through info@akrilon.ca.

The most up-to-date information on our systems and products is available on our website. However, you may request our systems and products catalogue through our representative at 1-866-236-5550 or at info@akrilon.ca.

We have systems that comply with requirements regarding fire resistance and non-combustibility in all building codes; be it at the national, provincial or municipal level. Given that every project may have distinct specifications, we suggest you communicate with our representative at 1-866-236-5550 or through info@akrilon.ca so that we may assist you.

Yes we do. Our "lunch box" format discussions are well received and appreciated by building professionals. The format includes a presentation of recent developments with our line of products and systems, followed by a round-table discussion of expertise and practical knowledge concerning the building envelope.

Yes, a number of areas on a building require the use of expansion joints to accommodate natural structural movement. The position of expansion joints are indicated in each of our systems specifications documents available on our website and in our catalogue.

No. An aesthetic groove may never be a substitute for an expansion joint.

The thickness of insulation will depend on the effective thermal resistance sought. Insulation that is fastened to the exterior of a building, even minimal thickness will reduce thermal bridges and be effective and efficient. Our geometrically designed insulation is available in 2 to 5 inches of thickness.

According to the Best Practice Guide: Exterior Insulation and Finish Systems, published by the Canada Mortgage and Housing Corporation (CMHC); "The expected longevity of properly manufactured and installed EIFS is of a minimal period of 30 years", as established by existing constructions.

Yes. The lamina comprised of the base coat, fibreglass mesh, primer and finish coat is 100% vapour permeable.

Yes they are. For assistance on LEED certification please contact our LEED Accredited Professional at 1-866-236-5550 or at info@akrilon.ca.

Yes. We include recycled materials in our "liquid" products.

In terms of system, traditional stucco usually consists of a cementitious coat applied on galvanized mesh that rests on a series of weatherproof membranes applied to a wood substrate. EIF system is composed of weather-resistive membranes that are flexible at openings. These membranes are continuous across the substrate ensuring their effectiveness as air and vapour barriers. The system also includes geometrically designed insulation that reduces thermal bridges and allows for better moisture management. The lamina completes the system. In terms of products, "parging" or modern stucco is composed of cement, sand and water and is usually applied to foundations. Parging is a simplistic mixture that in no way equals the exterior performance of acrylic coatings.

Turning to our representatives for integrated support is the best means of ensuring your EIFS project is properly executed. We offer a support predicated on opening and maintaining effective lines of communication between us; the manufacturer, you; the building professional and installers who are kept informed of technical details we have and requirements you have. From the onset of your project, contact one of our representatives at 1-866-236-5550 or through info@akrilon.ca so we may assist you with the details and specifications of your project. We will keep a rigorous and global vision of the building science while providing counsel on the most economical options open to you.

Yes, our EIFS include a secondary weather-resistive barrier that is continuous and 100% water, air and/or vapour resistant across the building envelope. In addition, our patented EPS insulation panel features 10mm deep geometric grooves to ensure drainage of the cavity. Moreover, the insulation panel may be installed without mechanical fasteners thus preventing perforation of the weather resistant membrane that protects and seals the building envelope.

Yes, since 1998, we have carried out institutional, commercial, industrial and residential building assemblies that have met the strict CCMC evaluations. You may obtain a copy of our evaluation report CCMC 13262-R at this address: http://www.nrc-cnrc.gc.ca/eng/services/irc/ccmc.html